Watts Electronics Vision WiFi Manuel D'utilisateur Et D'installation page 2

MAIN CHARACTERISTICS
 Touch screen
 Interface via internet (WiFi)
 Wall mountable with power supply 85-265VAC (50-60) Hz
 Table mountable with supplied bracket and mini USB power
supply (0-5V) (sold separately)
 Back up Battery operaWtion of 1 hour maximum
 RF Communication only with WATTS® Vision® devices (up to
40m internal, extendable with repeater)
 Able to manage up to 4 main supply circuits with a dedicated
pump or boiler on each
 Multiple heating/cooling devices control.
 SD Card slot for updating software
 Intuitive menus for devices management
COMPATIBLE DEVICES
BT-
√
FR02
RF
BT-
WR02
√
RF
BT-
√
WR02
HC RF
BT-
PR02
RF
BT-
M6Z02
RF
BT-
HCM02
RF *
BT-
√
TH02
RF
BT-A02
RF
BT-D02
√
RF
BT-
DP02
RF
REPEA
TER
* BT-M6Z02 RF is mandatory
√ √ √ √ √
√ √ √ √
√ √ √
√ √ √
√ √ √
√ √ √
√
√ √ √ √ √
MAXIMUM DEVICES / LIMITATIONS
 50 heating/cooling master devices (thermostats) and 50
heating/cooling slave devices (receivers).
 25 ON/OFF devices with weekly program with 15 min steps.
 50 lighting devices (ON/OFF).
 You may have to use a Watts RF repeater if you want to
extend the RF range.
TECHNICAL CHARACTERISTICS
It is an electronic control device
Operating temperature, connected.
Operating temperature, battery
Shipping and storage temperature
Electrical Protection
Electrical insulation
Temperature precision
Setting Temperature Range
- Comfort
- Reduced
- Anti-freeze
Power Supply
Radio Frequency
Software version
√ √
EU declaration of conformity
Hereby, Watts Electronics declares
that the equipment is in compliance
with the relevant Community
harmonisation legislation
√ √
SD card
WIFI
INSTALLATION SEQUENCE
Congratulations on purchasing your Watts Vision system.
Please follow the set-up sequence below;
√
1. Install your central unit (see installation – page 37)
and your connected devices (see relevant device
manuals)
2. Personalise your central unit user settings (see User
Settings Menu – pages 3 and 8)
3. Create your house / create and name your rooms (see
House Creation – page 4)
4. Pair your devices to the central controller / allocate
them to the appropriate rooms (see Pair your devices –
page 4) Please charge the central unit for at least one
hour before pairing the devices already mounted
5. Set up remote control of your system via smart-phone /
tablet (see Remote Control - page 5)
6. Program your devices so that they work on a time
schedule (see Heating / Cooling Device Management –
page 5)
2
-30°C to +40*C
0°C to +40°C
-30°C to +50°C
IP30
Class II
0.1°C
5°C to 30°C in 0.5°C steps
5°C to 30°C in 0.5°C steps
5°C to 10°C
85-265V 50-60 Hz
868 MHz, <10mW, Range < 40m
internal, <100m open space
User interface: Shown on the main
menu V.xx.xx
Wifi communication: Shown on the wifi
menu xx.xx
Directive 2001/95/EC on General
Products Safety
Low voltage directive 2006/95/EEC
Radio Equiment Directive
1995/5/EC-2014/53/EU
ROHS Directive 2011/65/EC
The full text of the EU declaration of
conformity is available on
wattswater.eu
<=16GB (FAT)
802.11b – 2.4GHz
802.11g – 2.4GHz