Special Notes; Storage And Transportation; Storage; Inspection And Servicing - zarges 47321 Notice De Montage Et D'utilisation

5.2 Special notes

Access aid, retractable
Extending the access aid before entering the shaft:
Extending the access aid from the shaft:
Retracting the access aid:

6. Storage and transportation

6.1 Storage

Store components in a location where they are protected from the elements, and if possible,
store them laid flat.
6.2 Transportation • Secure components with straps to prevent them sliding or falling during transport.
• Do not throw components during loading or unloading.

7. Inspection and servicing

7.1 Inspection

• Have the shaft ladders inspected for operational safety by a technical expert at intervals
• Document performance of the inspection, the findings of the inspection and any
• After successful inspection of the product, the ZARGES inspection plate (Order
> Grip the handle and pull out the access aid until the locking screw on the end of the
tube can be engaged in the recess in the guide. To do this, turn the handle slightly
to the side and press the access aid downwards. Make sure that the access aid is
firmly locked in position.
> From a safe standing place, push the access aid upwards until the locking screw
on the end of the tube can be engaged in the recess in the guide. To do this, turn
the handle slightly to the side and pull the access aid downwards. Make sure that
the access aid is firmly locked in position.
> Lift the access aid, turn it sideways and lower it completely.
appropriate for the operating conditions. Inspection must be carried out at least once
a year. The technical expert is authorised to carry out inspection by the operator and
must have taken part in the seminars prescribed by law in the country concerned.
measures implemented as a result of the inspection. ZARGES recommends that you
keep data sheets in which all data concerning the shaft ladder system are entered.
No. 828384, 30 plates) must be attached to the product. The month and year in which
the next inspection is due must be clearly legible.
15