Faro MAIA Mode D'emploi page 21

INSTRUCTIONS FOR USE
SWITCHES SYMBOL
ADJUSTING THE LIGHT INTENSITY
"MAIA" LAMP WITH SWITCH
On/Off/Adjustment
The control lever must be managed very carefully to avoid breakage. Each
time the lamp is turned on, the light intensity will be at the level memorised
when it was turned off the time before.
"MAIA" LAMP WITH PROXIMITY SWITCH
On/Off
"MAIA" LAMP WITH REMOTE CONTROL DEVICE
The remote cable must not be lengthened during installation. Any operation
done on the remote cable could produce negative effects on the "EMC"
performance.
On/Off/Adjustment
-
BUTTON B IS NOT ENABLED.
20
minimum intensity
light intensity
ON
SWITCH ON SWITCH OFF
A
OFF