Table des Matières
Publicité
WATTABOX
7 Handling and Storage
Handling
Storage
Other
8 Exposure Controls & Personal Protection
Engineering controls
Personal
Eye/face protection Not required beyond safety practices of employer.
Protection
Foot protection
9 Physical and Chemical Properties
Appearance
State
Odor
PH
Vapor pressure
Vapor density
Boiling point
Solubility in water
Specific gravity
Density
MATERIAL SAFETY DATA SHEET
Do not crush, pierce, short (+) and (-) battery terminals with conductive (i.e.
metal) goods.
Do not directly heat or solder.
Do not throw into fire.
Do not mix batteries of different types and brands.
Do not mix new and used batteries.
Keep batteries in non conductive (i.e. plastic)trays.
Store in a cool, dry and ventilated area, away from moisture, sources of heat,
open flames, food and drink.
Keep adequate clearance between walls and batteries.
Temperature above 70°C may result in battery leakage and rupture.
Since short circuit can cause burn, leakage and rupture hazard, keep batteries
in original packaging until use and do not jumble them.
Follow Manufacturers recommendations regarding maximum recommended
currents and operating temperature range.
Applying pressure on deforming the battery may lead to disassembly followed
by eye, skin and throat irritation.
Keep away from heat and fire. Keep in a cool and dry place.
Not required during normal operations. SCBA required in the
Respirator
event of a fire.
Gloves
Not required for handling of cells.
Steel toed shoes recommended for large container handling.
Prismatic shape
Solid
N/A
N/A
N/A
N/A
N/A
Insoluble
N/A
N/A
MSDS Li-ion
Rev. 1 January 2019
3
Publicité
Table des Matières
