Focus Setting; Cleaning Of The Optical System - Stage Line electronic LE-330CUB Mode D'emploi

LE-340KLD
Mode 1
(LED next to the button does not light up)
Change of the patterns and rotation are music-
controlled. Slower changes of the patterns and
changes of the rotation can additionally be
released with the button FUNCTION (10).
Mode 2
(LED next to the button lights up)
The patterns and the rotation change perma-
nently. It is possible to select between two
speeds with the button FUNCTION (10).
Mode 3
(LED next to the button flashes)
It is possible to select one of numerous combi-
nations from different quick changes of patterns,
rotation speeds, and rotation directions. Keep
the button pressed for running through all com-
binations.

6.2 Focus setting

Adjust the focal length by turning the knurled screw
below the lens at the front side of the unit so that the
presentation on the projected area obtains the desired
sharpness.

7 Cleaning of the Optical System

The lens and the other optical parts should be cleaned
at regular intervals, depending on impurities caused
by dust, smoke, or other particles. Only in this case the
light can be radiated at maximum brightness. Prior to
opening the unit, disconnect the plug from the mains
socket and let the unit cool down for 15 minutes.
For cleaning use a soft, clean cloth and a commercial
detergent for glass. Then carefully wipe the parts dry.
8 Specifications
Power supply: . . . . . . . . . . . 230 V~/50 Hz
Power consumption: . . . . . . 270 VA
Lamp: . . . . . . . . . . . . . . . . . . reflector halogen lamp
Ambient temperature: . . . . . 0 – 40 °C
Dimensions: . . . . . . . . . . . . . 270 x 140 x 320 mm
Weight
LE-330CUB: . . . . . . . . . . 7.7 kg
LE-340KLD: . . . . . . . . . . . 7.3 kg
Subject to technical modifications.
All rights reserved by MONACOR
be reproduced in any form or by any means for any commercial use.
24 V/250 W, type MR
16 with base GX 5,3
® INTERNATIONAL GmbH & Co. KG. No part of this instruction manual may
GB
9