Moulinex LM 2311 Mode D'emploi page 15

For easy cleaning, you can detach the blade unit (D1) from the jug (D4) by pressing the
"clic" button (D2) (Fig 7a, 7b, 7c).
The seal of the blade unit (D1) is not detachable.
The lid joint (D6) is removable.
The jug (D) and the accessories (E) and (F) can be cleaned in the dishwasher in the top
basket with the "ECO" or "LIGHTLY SOILED" programme.
Clean the motor unit (A) with a damp cloth and dry carefully.
Never immerse the motor unit (A) in running water.
What to do if your appliance does not work?
Problems Causes
The product The plug is not connected.
does not work.
The jug or accessory is not
correctly positioned or locked on
the motor unit.
The blade unit (D1) is not
correctly attached to the jug
(D4).
Excessive The product is not placed on a
vibrations. flat surface.
Volume of ingredients is too
high.
Leak from the Volume of ingredients is too
lid. high.
The
positioned.
The joint (D5) is not well
placed on the lid.
Leak at the The blade unit (D1) not
bottom of the properly or securely locked on
jug. the jug (D4).
lid is not correctly
Solutions
Connect the appliance to a socket
with the same voltage.
Check that the jug or accessories are
correctly positioned and locked on the
motor unit as shown in the instructions
You must hear a double "click".
Unlock the blade unit (D1) and bolt it
to the jug (D4) (fig 1a, 1b, 1c) once
again.
Place the product on a flat surface.
Reduce the quantity of ingredients
processed.
Reduce the quantity of ingredients
processed.
Lock the lid correctly on the blender
jug.
Place the joint (D5) correctly on the
lid (D6) (fig. 2a).
Place the blade unit correctly on the
jug; you must hear a click.
The button (D2) must be fully
aligned with the blade unit (D1).
11