Optimus GEMINI Mode D'emploi page 5

Les langues disponibles

FIGURE [2]

A: Connection Valve

B: Gas Canister

C: Fuel Hose

D: Burners

Optional Parts: (not included with initial purchase)

H: EN417/CGA600 Valve Connector

I: Propane Gas Hose CGA600/QCC1

TECHNICAL SPECIFICATIONS

Gas Category: direct vapour pressure I3B/P – butane/

isobutane/propane mix. Combustibles: Use only Optimus

100,110,220,230,450g gas cartridges certified to the EN417

standard. US/Canada only: Alternatively, a refillable bulk

LP-gas tank with a max. capacity of 20 lbs (9 kg) may also be

used with an adapter (Optimus Adapter sold separately). Only

use hoses certified to UL569,CSA8.1 or CSA8.2 to connect to

the adapter. It may be hazardous to attempt to fit other types

of gas canisters.

Gas Consumption (per burner): EU: 2.3kW nominal EN521

US/CA: EN417 disposable gas cartridges: 3.4kW; 240g/h;

11'600BTU/h. Refillable propane cylinder max 20 lbs(9kg):

1.8kW; 6'200BTU/h

Injector size of stove: 0.37mm

SET UP STOVE

1. Lay out fuel hose to full length and make sure that it is not

twisted in any place.

2. Check the O-ring in the valve connector before each use

for damage (see under 5. Maintenance).

3. Fold out legs of the stove. Legs are in place when unfolded

until resistance is felt.

4. Fold out both control valve handles and make sure that

they are fully closed (turned fully clockwise), even if only

one burner will be used.

E: Pot Support

F: Pot Support/Legs

G: Gas Flow Regulators

FIGURE [3]

FIGURE [4]

FIGURE [1]

SWE