Quick Start - Numark ORBIT Guide D'utilisation

User Guide (English)
Box Contents
•
Orbit
•
Mini-USB Cable
•
Wireless USB Receiver
•
User Guide
•
Safety & Warranty Manual
Product Registration and Support
Take a minute to register your Orbit at www.numark.com. Registering it ensures that we can
keep you updated with any new product developments and provide you with world-class
technical support if you have any issues.
Also, visit www.numark.com/orbit for the latest information about Orbit, including free
software, pre-made control mappings, a mapping editor, tutorial videos, and more.
For additional product support, visit www.numark.com/support.
Quickstart
1. Visit www.numark.com/orbit to download free software or a control map for your
existing software. The control map specifies which software commands Orbit will
operate. You can also download the Orbit Editor, which lets you change what messages
Orbit sends to your software.
2. Install and open the software you downloaded, or open your own MIDI-controllable
software.
3. Connect the wireless USB receiver to your computer.
4. Power Orbit on (using the power switch on its underside).
5. If necessary, check your software's Preferences or Settings, select Orbit as the
hardware controller or device, and import the Orbit control map file into your software.
6. Step away from the computer—start using Orbit!
Important:
•
A battery's charge can deplete gradually even when it is not being used. If Orbit's charge
does not last for long during its first use, charge it fully for 3 hours (see the Charging and
Power Usage section of this manual for more information).
•
To ensure the best possible wireless reception and performance, see the Tips for
Optimal Performance section later in this manual.
3