Pre-Installation; Planning Installation; Tools/Hardware Required; Package Contents - ETI ST-2-9-840-SV-N Guide D'utilisation Et D'entretien

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Pre-installation

PLANNING INSTALLATION

Before beginning assembly, installation, or operation of product, make sure all parts are present. Compare parts with the Hardware Included
and Package Contents lists. If any part is missing or damaged, do not attempt to assemble, install, or operate the product. Contact customer
service for replacement parts.
nOTe: Keep your receipt and these instructions for proof of purchase.
If you are unfamiliar with electrical installations, we recommend you contact a qualified electrician to do the installation.

TOOLS/HARDWARE REqUIRED

Tools and hardware required vary by type of installation.
Wire
Strippers
Measuring
Tape
Cord Clips
CaUTiOn: Chains/cables and hooks must have weight bearing capacity exceeding 11 lbs.(5 KG). S hooks must be ≤ 0.1 in. (2.5 mm).
nOTe: Eye hooks can be used as an alternate method of attaching the fixture to the ceiling when suspension mounting.

PACKAGE CONTENTS

Part
Description
A
Lens Cover
B
Fixture Body
A
B
Safety
Goggles
Phillips
Screwdriver
Hook Screws*
quantity
1
1
Ladder
Electrical
Tape
Chains with
S hooks
3
Please contact 1-855-384-7754 for further assistance.
Gloves
Power Drill with
drill bits
* For Suspension Mounting only
www.ETiSSL.com

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

St-4-18-840-sv-n5426314354261143

Table des Matières