Pre-Installation; Planning Installation; Tools/Hardware Required; Package Contents - ETI 64501141 Guide D'utilisation Et D'entretien

pre-installation

PLANNING INSTALLATION

Before beginning assembly, installation or operation of product, make sure all parts are present. Compare parts with the package
contents list. If any part is missing or damaged, do not attempt to assemble, install or operate the product. Contact customer service for
replacement parts.
noTe: Keep your receipt and these instructions for proof of purchase.
If you are unfamiliar with electrical installations, we recommend you contact a qualified electrician to do the installation.

TOOLS/HARDWARE REQUIRED

Tools and hardware required vary by type of installation.
Wire
Strippers
Flathead
Screwdriver
Power Drill
with drill bits
CaUTion: Chains/cables and hooks must have weight bearing capacity exceeding 11 lbs. (5 KG). S hooks must be ≤ 0.1 in. (2.5 mm).
noTe: Eye hooks can be used as an alternate method of attaching the fixture to the ceiling when suspension mounting.

PACKAGE CONTENTS

Part Description
A Fixture Lens Cover
B Fixture Body
Safety
Goggles
Phillips
Screwdriver
Hook
Screws*
A
Quantity
1
1
B
Ladder
Electrical
Tape
* For suspension mounting only
3
Please contact 1-855-384-7754 for further assistance.
Gloves
Wire
Cutters
www.ETiSSL.com