Montarbo M Serie Notice D'emploi page 7

M SERIES
QUICK SETUP
5
Place the speakers in correct position.
With the device off, set the main level volume to
minus infinity
Connect the power supply unit and switch the
devices on
INSTALLATION TIPS
6
For optimal positioning, set the speakers in vertical position at ear height (preferably use the
midpoint between woofer and tweeter as a reference). slightly tilted towards the listener.
It is advisable to mechanically decouple the monitors from the desk with proper insulating
foam supports (not included) to avoid undesired resonances. Avoid frontal obstacles that
may cover the reflex openings or the transducers.
12
Perform the necessary connections of the
audio sources (XLR, TRS balanced, RCA
unbalanced)
Adjust the audio level and any equalization
on the back depending on the optimisation
required for listening.
TROUBLESHOOTING
7
The loudspeaker will not turn on
Check that power supply is present upstream of the installation.
Ensure that the power supply cable is properly plugged in.
Resonances are heard, in particular on low frequencies
Follow the installation tips, and use the EQ controls on the rear to correct any unwanted
reflections caused by the monitor position in the listening room.
TECHNICAL SPECIFICATIONS
8
MODEL M6S
2-way bass reflex
Type
111 dB
MAX SPL (@ 1m)
40 Hz-22 kHz
Frequency response (-10 dB)
1" silk dome tweeter
HF
6.5" woofer custom, reinforced Kevlar
LF
cone
1780 kHz
X-OVER
Amplification class A/B
30 W + 10 W
Peak power (LF+HF)
110-120V~ 50-60Hz
Operating voltage
220-240V~ 50-60Hz
Analogue, active crossover filter
Signal process
1 x BALANCED TRS/XLR
I/O connectors
1 x UNBALANCED RCA
MAIN level
Controls
EQ: HPF + HF LEVEL
110-120V~: T2A L 250V~
Fuse
220-240V~: T1A L 250V~
0.36 A (110-120V~)
Power consumption at 1/8th
0.19 A (220-240V~)
of the power (average
conditions of use)
0.5 A (110-120V~)
Absorption at 1/3rd of power
0.3 A (220-240V~)
(maximum conditions
of use)
11 W
Standby consumption
MDF, front in ABS
Cabinet material
250 x 430 x 237 mm
Dimensions (L x H x D)
(9.8" x 16.9" x 9.3")
7.9 kg (17.41 lbs)
Weight
User manual
M8S
2-way bass reflex
115 dB
35 Hz-22 kHz
1" silk dome tweeter
8" woofer custom, reinforced Kevlar
cone
1950 kHz
A/B
50 W + 10 W
110-120V~ 50-60Hz
220-240V~ 50-60Hz
Analogue, active crossover filter
1 x BALANCED TRS/XLR
1 x UNBALANCED RCA
MAIN level
EQ: HPF + HF LEVEL
110-120V~: T3.15 A L 250V~
220-240V~: T1.6A L 250V~
0.65 A (110-120V~)
0.34 A (220-240V~)
1 A (110-120V~)
0.52 A (220-240V~)
12 W
MDF, front in ABS
310 x 524.5 x 280 mm
(12.2" x 20.6" x 11")
10.7 kg (23.6 lbs)
13