Screen Overview - MS Schippers MS Fan Controller Touch Mode D'emploi

2.2 Screen overview

A: The alarm bell icon is displayed here. If no alarm is active, this icon is gray
. If an alarm is active, the icon turns red. The alarm bell icon is orange
when alarms have been silenced but not yet resolved.
B: On the right side of the screen, you can swipe up and down through all the control icons.
By pressing the icon, you can enter your desired settings (see Figure 2: Change settings). The set values
are displayed to the right of the corresponding icon.
C:
1 The set point value in °C.
2 The measured room temperature in °C.
3 The current state of ventilation.
4 The minimum to maximum ventilation set.
MS_FANCONTROL_TOUCH_GEBRUIKERSHANDLEIDING
EN - MS Fancontroller Touch
Figure 1: MS Fancontrol Touch screen layout
Page 7
9