Bandwidth; Ventilation Stop; Switching The Controller On Or Off; Restore Factory Value - MS Schippers MS Fan Controller Touch Mode D'emploi

3.5 Bandwidth

Input range: 1.0°C - 20.0°C [factory value: 5.0°C]
Here you can set the desired temperature range in which the ventilation is increased from minimum to
maximum.

3.6 Ventilation stop

Input range: -10.0°C - 10.0°C [factory value: -10.0°C]
Temperature deviation with respect to the set temperature at which the ventilation stop is activated. The
ventilation stop activates relay 2 with a potential-free changeover contact.

3.7 Switching the controller on or off

Input range: On or off
When the controller is turned on, the background colour is blue. All functionality is enabled in this situation.
When the controller is switched off, the background colour changes to orange. When switched off, the
ventilation stop is active and the analogue fan signal is 0V. The alarm function remains active.

3.8 Restore factory value

This function resets all settings to their default values. If clicked, a pop-up appears to confirm this action. If
the controller was switched off (see above), this function will switch the controller back on again.
MS_FANCONTROL_TOUCH_GEBRUIKERSHANDLEIDING
EN - MS Fancontroller Touch
Bandbreedte
Ventilatie stop
offset
Regelaar
in-/uitschakelen
Herstel naar
fabriekswaarde
°C
°C
Aan/Uit
Open Pop-up
Page 10
12