Maintenance - Sharp SD-SG11 Mode D'emploi

SD-SG11
Troubleshooting Chart (continued)

If trouble occurs (reset)
When this product is subjected to strong external interference (mechanical shock,
excessive static electricity, abnormal supply voltage due to lightning, etc.) or if it is
operated incorrectly, it may malfunction.
If such a problem occurs, do the following:
Unplug the power cord from the AC outlet. Then, plug it in again and retry the
operation.
Caution:
This operation will erase all data stored in memory including clock, timer settings,
tuner preset, and CD or MiniDisc program.

Condensation
Sudden temperature changes, storage or
operation in an extremely humid environ-
ment may cause condensation inside the
cabinet (CD pickup, MD pickup, etc.) or on
the transmitter on the remote control.
Condensation can cause the unit to mal-
function. If this happens, leave the power on
with no disc in the unit until normal playback
is possible (about 1 hour). Wipe off any con-
densation on the transmitter with a soft cloth
before operating the unit.

Before transporting the unit
Remove the CD and MiniDisc from the unit. Your unit checks whether there are any
discs inside. "NO DISC" appears if no disc is inside. Then, set the unit to the power
stand-by mode. Carrying the unit with discs left inside can damage it.
E-47

Maintenance

Cleaning the cabinet
Periodically wipe the cabinet with a soft cloth and a diluted soap solution, then with a
dry cloth.
Caution:
Do not use chemically treated cleaning cloths or other chemicals.
01/7/12 38-48.fm