Programmed Play - Sharp SD-SG11 Mode D'emploi

Programmed Play

Up to 20 CD tracks or 20 MD tracks can be programmed.
You cannot program CD and MiniDisc tracks together at the same time.
1
Press the CD or MD button.
2
Press the PROGRAM button to enter the programming save mode.
3
Press the direct buttons to select the desired track.
Playback order
Playback time
4
Repeat step 3 for any other track. Up to 20 tracks can be pro-
grammed.
If the total programmed playback time exceeds 400 minutes, "--:--" is displayed.
However, it is properly memorized.
5
Press the CD or MD button.
6
Press the CD or MD button to start playback.
To clear the programmed selections:
Press the CLEAR button while the "PROGRAM" indicator is flashing.


Each time the button is pressed, one track will be cleared, beginning with the last
track programmed.
To cancel the programmed play mode:
While in the stop mode, press the CLEAR button. The "PROGRAM" indicator will dis-
appear and all the programmed content will be cleared.
Adding tracks to the program:
If a program has been previously stored, the "PROGRAM" indicator will be displayed.
Then follow steps 1 - 5 to add tracks. The new tracks will be stored after the last track
of the original program.
To check which tracks are programmed:
While the unit is stopped in the programmed play mode, press the
Notes:


Ejecting a CD or MiniDisc automatically cancels the programmed sequence.


Even if you press the ON/STAND-BY button to enter the stand-by mode or change
the function from CD or MD to another function, the programmed selections will
not be cleared.


During program operation, random play is not possible.
01/7/12 15-24.fm
SD-SG11
or button.
E
F
E-22