Sharp SD-SG11 Mode D'emploi page 36

SD-SG11
Titling a MiniDisc (continued)
4
Press the 1 - 10, SYMBOL and CHARACTER buttons to enter the
characters.


The CHARACTER button allows switching between capital and small letters.


You can enter the following symbols by pressing the SYMBOL button.
5
When the name has been completely entered, press the ENTER
button.
Characters (symbols):
Capital
1 ABC 2 DEF 3 GHI 4 JKL 5 MNO 6 PQRS 7 TUV 8 WXYZ 9 0
letters
Small
1 abc 2 def 3 ghi 4
letters
– . , / : ? & ( ) ! " # $ % ∗ ; < = > @ _ ` + '
: indicates a space.
E-33
jkl 5 mno 6 pqrs 7 tuv 8 wxyz 9 0
To erase disc and track names:
1 Perform steps 1- 2 in the "Creating disc and track names" section on page 32.
2 Press the TIMER/DELETE button for 3 seconds or more.


"NAME CLEAR?" will appear.
3 Press the ENTER button to finish.
To delete a character:
1 Perform steps 1- 3 in the "Creating disc and track names" section on page 32.
2 Press the REC LEVEL/CURSOR or button on the remote control to flash the
character to be deleted.
3 Press the TIMER/DELETE button.
4 Press the ENTER button to finish.
To add a character:
1 Perform steps 1- 3 in the "Creating disc and track names" section on page 32.
2 Press the REC LEVEL/CURSOR or button on the remote control to flash the
character before which you want to add a new character.
3 Select a character to enter, press the ENTER button.
To change a character:
Example) To change "LAVE" to "LOVE"
1 Perform steps 1 - 3 in the "Creating disc and track names" section on page 32.
2 Press the REC LEVEL/CURSOR or button on the remote control to flash the
character to be changed.
3 Press the TIMER/DELETE button.
4 Enter a new character.
5 Press the ENTER button.
01/7/9 25-37.fm