Reggiani MORPHY Instructions De Montage page 9

support by tightening lateral screws.
- To mount the fixture (Dwg.
Separate cover
screws. Adjust support direction for desired final inclination of
the fixture through screw
with relevant bolt. Separate plate
proceed to fix it to support
O
screw , flat washer
V1
put between plate
positioning in sequence on the other side flat washer
O
one and bolt
R2
support by tightening lateral screws. Hence, proceed to
mount the fixture body following instructions previously
described.
WEEE Luminaires are defined as Waste Electrical and Electronic Equipment (WEEE)
and as such may not be disposed of as solid urban waste. At the end of their life
cycle, they must therefore be correctly treated and disposed of as substances of
concern for both the environment and human health due to the presence of dangerous
substances in the electrical and electronic components.
The user must therefore consign used luminaires to the distributor when purchasing an
equivalent new luminaire or, exclusively in the case of Italy, directly to Ecolight, the
Consortium for the Disposal of Waste Electrical and Electronic Equipment (Consorzio
per lo Smaltimento degli Apparecchi di Illuminazione), delegated by Reggiani S.p.A.
Illuminazione, who will collect the equipment free of charge and delivery it to the special
collection facilities set up by the local authorities to recover, treat and dispose of WEEE.
The illegal or inappropriate disposal of said waste is punishable by economic and/or
administrative sanctions of the amount established by the law.
N.B. The free collection of a luminaire may be refused if there is a risk of contamination for
the personnel performing the service, if it is evident that the luminaire does not contain the
essential components or if it contains waste other than WEEE, or if the weight of the luminaire
collected is more than double the weight of the luminaire acquired. In these circumstances,
disposal is the responsibility of the holder.
MORPHY
)
from support
and tightening it on the other side
by means of supplied accessories:
O
, gasket
R1
and support
to come last. Reposition cover
9
by loosening lateral fixing
from fixture body and
and toothed washer
. Complete mounting by
O
O
to
R2
, toothed
R3
on
ENGLISH