Ezviz C6N Mode D'emploi page 10

Installation (Optional)
1
Install the Micro SD Card (Optional)
1. Rotate the sphere upwards until you see the card slot.
2. Insert the Micro SD card (sold separately) into the card slot as shown
in the figure below.
After installing the Micro SD card, you should initialize the card in
the EZVIZ app before using it.
3. In the EZVIZ app, tap the Storage Status in the Device Settings
interface to check the SD card status.
4. If the memory card status displays as Uninitialized, tap to initialize it.
The status will then change to Normal and it can store videos and/
or pictures.
5
This Side Up