Télécharger Imprimer la page

H+H BS 300 Mode D'emploi page 19

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 21
Cleaning
Press the button (18) to switch the breast
pump off.
DANGER!
• Risk of fatal injury through electric shock!
Disconnect the breast pump from the
power supply before starting any clean­
ing work.
Ensure that the pump unit never comes
into contact with water.
Disconnect the power adapter plug from the
power socket (or the USB plug from the com­
puter).
Disassemble the breast pump and acces­
sories into their individual parts.
CAUTION!
• Property damage!
Electronic components could be dam­
aged.
Never clean the pump unit with water.
Use a slightly moistened, lint-free cloth
to clean the pump unit.
Pull the valve (13) from the pump hous­
ing using the handle.
Flush all the individual parts thoroughly un­
der running water.
CAUTION!
• Property damage!
Milk residues could lead to material dam­
age.
Clean the individual parts thoroughly.
Use a mild washing-up liquid and then
rinse with running water.
The individual parts of the breast pump
are dishwasher-proof. Please note that
cleaning the individual parts in a dish­
washer DOES NOT sterilise the individual
parts.
Sterilising
Sterilisation of the breast pump and acces­
sories ensures that the breast milk is not con­
taminated when collected, stored and fed.
Before sterilising the individual parts of
the breast pump, the individual parts
must have been cleaned as described in
Chapter Cleaning.
CAUTION!
• Property damage!
Electronic components could be dam­
aged.
It is not necessary to sterilise the pump
unit.
Fill a suitably sized, household cooking pot
with sufficient water and bring it to the boil.
WARNING!
• Risk of scalding!
Boiling water can lead to severe burns.
Avoid direct contact with hot water and
steam.
Insert the individual parts in the boiling wa­
ter.
Remove the individual parts from the boiling
water after about 10 minutes.
Allow the individual parts to drip-dry. The
clean, sterile parts are now ready to be used
again (refer to Chapter Assembling the Breast
Pump).
Keep the breast pump and all the individ­
ual parts dust-free, as far as possible,
until they are used again; wrapped in a
clean, lint-free tea towel for example.
19

Publicité

loading

Produits Connexes pour H+H BS 300