Beninca PONY 115 Mode D'emploi page 21

During the autoset operations, the control unit automatically performs several opening and closure manoeuvres.
Before proceeding, check that no person, animal or obstacle is or can be in the door manoeuvre area.
All the accessories provided for the system should be already connected to the control unit. If further accessories should be added,
self-adjustment must be repeated.
* The slowing phase must be activated via the TSM parameter. The control unit is supplied with the parameter set at 0 (Off); the AUTO function does not activate slowing but is
limited to defining a suitable torque value.
AUTO
EN
PGM
AUTO
PRG
PGM+
TCA
0000
0004
PRG
PGM+
pmot
0001
0004
PRG
PGM+
21