Hilti SL 2-A12 Mode D'emploi Original page 9

4 Technical data
4.1 Technical data
SL 2-A12
Voltage 10.8 V
Bright- 500 lm
ness
Weight 0.65 kg
(1.43 lb)
5 Operation
5.1 Preparations at the workplace
CAUTION
Risk of injury! Inadvertent starting of the product.
▶ Remove the battery before making any adjustments to the power tool
or before changing accessories.
Observe the safety instructions and warnings in this documentation and on
the product.
5.2 Inserting the battery
CAUTION
Electrical hazard. Dirty contacts may cause a short circuit.
▶ Before inserting the battery, check to ensure that the battery terminals
and the contacts on the product are free from foreign objects.
CAUTION
Risk of injury. If the battery is not fitted correctly it may drop out and fall.
▶ Check that the battery is securely seated in the product so that
it cannot drop out and fall, thereby presenting a hazard to other
persons.
▶ Insert the battery and check that the battery is securely seated in the
device.
5.3 Removing the battery
1. Press both release buttons.
2. Pull the battery to the rear and out of the product.
Printed: 21.04.2017 | Doc-Nr: PUB / 5346559 / 000 / 00
SL 2-A22
21.6 V
500 lm
1.3 kg
(2.9 lb)
English 5