Publicité
Les langues disponibles
Les langues disponibles
P73037/F1D080 univ/man.qxd
When connecting to a new blue G3, the DB15 cable is not used, and DIP
switches 1-6 need not be set. Simply connect the G3's HD15 monitor port
directly to the OmniView
4) Connect the Adapter to a free port on your OmniView
the PS/2 mouse connector can be used. The cables required are NOT
included, however they can be purchased as a cable kit (Belkin part#
A3X982), or individually (two F2N036-06, one F2N025-06-T). See Figure 2.
Back of 4 Port OmniView
F2N025-06-T
F2N036-06
Figure 2
5) Set the DIP switches on the Adapter according to the type of keyboard,
Mouse and Monitor you are using. The "ON" position is downward.
4/21/00
2:01 PM
Hardware Installation
™
HD15 connector.
™
PS/2
4
3
2
3
Page 3
™
PS/2. Note that only
1
En
Publicité
