Publicité
Les langues disponibles
Les langues disponibles
•
This range hood is factory set for venting through the roof or wall.
•
Vent work can terminate either through the roof or wall. To vent through a wall, a 90° elbow is needed.
IMPORTANT:
•
NEVER exhaust air or terminate duct work into spaces between walls, crawl spaces, ceiling,
attics or garages. All exhaust must be ducted to the outside.
•
Use metal/aluminum duct work only.
•
Fasten all connections with sheet metal screws and tape all joints with certified Silver Tape or Duct Tape.
•
Use caulking to seal exterior wall or roof opening around the cap.
OPTION 1:
HORIZONTAL WALL VENTING
SIDE WALL CAP
ROOF CAP
VERTICAL ROOF VENTING
OPTION 2:
Publicité
