Connecting Optional Components - Sony WEGA KP-FW51 Mode D'emploi

Connecting optional components

You can connect optional audio/video components, such as a VCR,
a DTV (Digital Television) receiver, multi disc player, camcorder,
video game, or stereo system. To watch and operate the connected
equipment, see pages 18 and 36.
Connecting a camcorder/video game equipment
using t 4 (video input 4) jacks
To open the drop-down panel of your
projection TV, push it up until you hear a
click, then it will slide down.
Video game
equipment
To S video
output
or
Camcorder
To video and
audio outputs
Notes
• When connecting video game equipment, display the "Setup" menu and
• You can also connect video equipment to the t 1, 2, or 3 (video input)
• When you connect video equipment to the S video input, display the
S video cable (not supplied)
Audio/Video cable (not supplied)
select "On" for "Game Mode" to adjust the picture setting that is suitable
for video games (see page 84).
jacks at the rear of your projection TV.
"Setup" menu and select "Auto" for "S Input" (see page 85). If the signals
are input to both (S video input) and
signal is automatically selected. To view the video signal input to
(video input), select "Off" for "S Input".
Front of projection TV
To
(S video input)
To t 4 (video input)
(yellow)
-L (MONO) (white)
-R (red)
(video input), the S video
Using Your New Projection TV
L(MONO) R
4
: Signal flow
continued
11