Chauvet DJ INTIMIDATOR BEAM 355 IRC Guide De Référence Rapide page 4

EN
Menu Map
MAIN LEVEL
Address
DMX
Slave
Run Mode
Manual
Screen Reverse
Setup
Sys Info
DMX Linking
The Intimidator Beam 355 IRC can work with a DMX controller. Instructions for connecting and configuring this product for
DMX operation are in the User Manual. If you are not familiar with DMX, download the DMX Primer from www.chauvetdj.com.
Starting Address
To ensure full access to all channels available in each DMX mode, the highest recommended DMX address is 499.
Master/Slave Connection
The Intimidator Beam 355 IRC uses the DMX data connection for its Master/Slave mode. Information about configuring
the Intimidator Beam 355 IRC for Master/Slave operation is in the User Manual, which is available from the Chauvet
website.
IRC-6 (Infrared Remote Control)
The Intimidator Beam 355 IRC can be operated with the CHAUVET IRC-6. For more information about the IRC-6,
download instructions for the IRC-6 or the Intimidator Beam 355 IRC User Manual from www.chauvetdj.com.
3
QUICK REFERENCE GUIDE
PROGRAMMING LEVELS
001–512
14CH
08CH
Slave1–4
Auto
Sound
IR
Pan
Tilt
Color
Gobo
Prism/Frost
Dimmer
Shutter
Pan Reverse
Tilt Reverse
Pan Angle
Tilt Angle
Totem Mode
Sensitivity
Reset
Factory Set
Ver:
Running Mode
DMX Address
Temperature
DESCRIPTION
Sets the DMX starting address
Selects DMX mode
Selects Slave mode 1, 2, 3, or 4
Selects Auto mode
Selects Sound-Active mode
Selects infrared control
0 to 540°
0 to 270°
Selects color options
000–255 Selects gobo options
Selects prism and rotation effect
Sets dimmer value
Sets shutter value and strobe effect
OFF Normal pan operation
ON Reverse pan operation
OFF Normal tilt operation
ON Reverse tilt operation
OFF Normal display
ON Reverse display
540 Selects the 540° pan angle range
360 Selects the 360° pan angle range
180 Selects the 180° pan angle range
270 Selects the 270° tilt angle range
180 Selects the 180° tilt angle range
90 Selects the 90° tilt angle range
OFF Normal mode
UP Totem mode Base Up
DOWN Totem mode Base Down
001–100 Sets sound sensitivity
Resets the product
Loads factory defaults
V_ Displays the software version
_ _ _ _ _ _ _ Displays the current running mode
_ _ _ Displays the current DMX address
_ _ _ Displays the current product temperature
Intimidator Beam 355 IRC QRG Rev. 1