Metek Powervar GTS Serie Manuel De L'utilisateur page 10

• The AC power supply for the UPM should be conveniently near the
UPM and easily accessible – avoid extension cords or temporary
power strips to power the UPM.
• The total leakage current of the UPM and consumer connected
equipment should not exceed 3.5 mA.
• Not for use in a computer room as defined in the Standard for the
Protection of Electronic Computer/Data Processing Equipment,
ANSI/NFPA 75.
• The socket-outlet shall be installed near the equipment and shall
be easily accessible.
• The battery should be disconnected from the UPM by unplugging
at its quick connectors when maintenance or service work inside
the UPM is necessary.
• Do not dispose of batteries in a fire – batteries may explode.
• Do not open or mutilate batteries. Doing so may release electrolyte
or other toxic substances, which may be harmful to the skin, eyes,
or the environment. A battery can present a risk of electric shock
and high short circuit current. The following precautions should be
observed when working with batteries:
• Remove watches, rings, or any other metal jewelry or objects
which may make contact with the battery.
• Use tools with insulated handles.
Risk of Energy Hazard, 12 V, 8.5 Ampere-hour battery for ABCEG251
and ABCEG401. Before replacing batteries, remove conductive
jewelry such as chains, wrist watches, and rings. High energy through
conductive materials could cause severe burns.
Risk of Energy Hazard, 24 V, 8.5 Ampere-hour battery for
ABCEG601. Before replacing batteries, remove conductive
jewelry such as chains, wrist watches, and rings. High energy
through conductive materials could cause severe burns.
10
CAUTION
CAUTION
A01-00030 Rev D