Best IS42 Manuel D'instructions page 6

CONNECT DECORATIVE FLUE
1. Secure the upper flue to the upper support
frame with the mounting screws (3.9x9.5mm).
2. Insert the lower flue moving it completely
towards the top and fix it temporarily with
retaining screw (3.9x9.5mm).
2
INSERT THE LOWER FLUE
INSTALL DUCT COLLAR
1. Fold the 2 tongues outwards.
2. Secure the discharge collar to the hood
with (2) retaining screws (3.9x9.5mm).
MOUNT HOOD TO SUPPORT
FRAME
1. Insert four (4) bolts through the top of the
hood - from the inside.
2. Use four (4) nuts and (4) washers (D.6.4mm)
to secure hood to support frame as shown.
RETAINING
SCREW
(3.9x9.5mm)
- 6 -
1
MOUNTING SCREWS
(3.9x9.5mm)
RETAINING
SCREWS
(3.9x9.5mm)
TONGUES
USE (4) NUTS AND (4) WASHERS
UPPER FLUE
LOWER
FLUE
DISCHARGE
COLLAR
WASHERS
(Ø6.4mm)
NUT
BOLT