Ccpm Helicopter With Gyro; Selecting A Model Memory; Selecting A Model Type - Horizon Hobby Spektrum DX8 Guide De Programmation

EN
Pos appears below Start in the Timer screen. This value is the stick position
where the throttle activates the timer. Rotate the roller to highlight Pos. Press
the roller to access the Stick values. The value is adjustable from 0 to 100% and
correlates to the actual throttle stick position. Rotate the roller to select the desired
Stick value then press the roller to accept.
To select the warning type, highlight Tone then press the roller. Rotate the roller to
select Inhibit, Tone, Vibe or Tone and Vibe

CCPM HElICOPTER WITH GyRO

The specific example below gives setup detail for a 3-servo 120-degree CCPM
helicopter with a tail lock gyro and AR7100R with RevLimit
information on swashplate mixing and programming an active countdown timer
on throttle up. While this setup guide is specific to 120° CCPM helicopters,
heading lock gyros and RevMax
equipment will be similar.
SERVO CONNECTIONS
RUDD-Rudder
GEAR-Gyro Gain
AUX1-Pitch
The Spektrum AR7100R RevLimit feature employs technology exclusively licensed
to Horizon Hobby, Inc. from Model Avionics.
RevMax is a trademark of Model Avionics.
10
. It also includes
™
governors, setup of other types and brands of
™
StEP #1

SElECTING A MODEl MEMORy

First, select the model memory you intend to store the model' s programming in.
You can access Model Select through the System Setup mode or Direct Access.
Direct Access is the easiest way to enter Model Select. You can enter Direct
Access anytime the main screen or a telemetry screen is displayed.
Direct Access Model Select
Press the Clear and Back buttons simultaneously to access the Model Select screen
The Model Select screen displays for 10 seconds. If no activity occurs, the screen
returns to the previous Main or Telemetry screen.
Rotate the roller to Highlight the desired model then press the roller to select.
This model will be selected and the name (MDL02-HELI) will display on the main
screen.
Note: If you change the model memory you will need to rebind the receiver to the
THRO-Throttle
new model memory.
AILE-Aileron
ELEV-Elevator
StEP #2

SElECTING A MODEl TyPE

Model Type programs the selected model memory from step #1 above to function
in Helicopter or Airplane Mode.
SPEKTRUM DX8 • PROGRAMMING GUIDE