FITFIU FITNESS BELI-150 Manuel D'instructions page 43

STEP 5
Install the left/right connecting rod (6) and (7) on
the left/right handlebar (3) and (4) with two hex
screws (16), two flat washers (61), two spring
washers (69) and two nylon nuts (17). Tighten the
nuts and bolts with the tools provided.
STEP 6
Connect the left connecting rod (6) and left
pedal (36) to the crank handle with a spacer
sleeve (63), a clip (37), a bearing (38) and a left
nylon nut (52) clockwise. Tighten the nuts with
the supplied tools.
Connect the right-hand connecting rod (7) and
right-hand pedal (54) to the crank handle with a
spacer sleeve (63), a clip (37), a bearing (38) and
a right-hand nylon nut (53) counterclockwise.
Tighten the nuts with the tools provided.
43
BELI-150
EN