FITFIU FITNESS BELI-150 Manuel D'instructions page 42

STEP 3
Place the rod (26) in the hole in the main frame (1).
Install the plate (76) into the main frame (1) with a hex bolt
(56) and an arc washer (57). Tighten the bolts with the
Allen wrench supplied.
STEP 4
Slide left/right handlebars (3) and (4) over bar (26)
and secure in place with two flat washers (25),
two spring washers (69) and two nylon nuts (17).
Tighten the bolts with the supplied S6 Allen
wrench.
Then place the two nut caps (23) over the nylon
nuts (17).
42