Fieldsheer MOBILE WARMING HEATED GEAR Manuel D'utilisation page 14

QUICK START GUIDE: VEHICLE POWER QUICK START GUIDE: VEHICLE POWER
7. Now that the power is connected to jacket or vest, press 7. Now that the power is connected to jacket or vest, press
and hold the touch control button for a few seconds. Once and hold the touch control button for a few seconds. Once
it's powered on LED will be Red/100% heat. it's powered on LED will be Red/100% heat.
8. After the jacket or vest is on, push 8. After the jacket or vest is on, push
the control button to reach your the control button to reach your
desired settings. desired settings.
9.To power off jacket or vest, press and 9.To power off jacket or vest, press and
hold the touch control button until light hold the touch control button until light
turns off. Always remember to discon- turns off. Always remember to discon-
nect the Jacket or Vest from the power nect the Jacket or Vest from the power
lead harness before leaving vehicle. lead harness before leaving vehicle.
13 13
1 1
3S 3S
Default setting
warming 2.0Hrs.
2 2
Default setting
warming 2.0Hrs.
3 3
3S 3S
2
1 1
2
® ®