Fieldsheer MOBILE WARMING HEATED GEAR Manuel D'utilisation page 10

QUICK START GUIDE: BATTERY POWER QUICK START GUIDE: BATTERY POWER
4. Now that the battery is connected to jacket or vest, press 4. Now that the battery is connected to jacket or vest, press
and hold the touch control button on for a few seconds. Once and hold the touch control button on for a few seconds. Once
it's powered on LED will be White/100% heat. it's powered on LED will be White/100% heat.
5. After the gear is on, push the control 5. After the gear is on, push the control
button to reach your desired settings. button to reach your desired settings.
6. To power off gloves and hold the touch 6. To power off gloves and hold the touch
control button until light turns off. If you control button until light turns off. If you
plan to not use the gloves for more than a plan to not use the gloves for more than a
few days, unplug both batteries from the few days, unplug both batteries from the
gloves gloves
9 9
1 1
3S 3S
Default setting
warming 2.0Hrs.
2 2
Default setting
warming 2.0Hrs.
3 3
3S 3S
® ®