PNI MP10 Manuel Utilisateur page 4

FEATURES
1. HDMI:
4Kx2K 30HZ(3840x2160), downward compatible with
1080P, 1080I, 720P
HDMI will be 1080P @60HZ while HDMI & VGA work
simultaneously.
Note: To use the HD output port, the host USB-C port from
your device must support DisplayPort Alt Mode.
2. VGA:
1080P@60HZ, downward compatible with 1080P, 1080I,
720P
Note: To use the HD output port, the host USB-C port from
your device must support DisplayPort Alt Mode.
3. USB3.0:
3-A. Transmission speed 5Gbps, downward compatible
with USB2.0/1.x; power supply up to 4.5W Max
3-B. Transmission speed 5Gbps, downward compatible
with USB2.0/1.x; power supply up to 7.5W Max (Must be
connected to the power delivery supply)
*For a stable connection, do not use this hub with high-
power devices. It supports one hard drive max.
4. Max Ethernet speed: 1000Mbps
5. SD/TF card reader:
SD & TF can work simultaneously. Read and write speed
depends on card's quality.
6. USB-C Female charging port:
PD3.0; Support 100W power in; Power out (charging) is
limited to 87W for safety.
7. 3.5mm Analog Audio Output
Comply with USB-C interface specification
Built in conversion chip, plug and play.
2