User Manual - PNI PMR R40 Pro Manuel Utilisateur

Masquer les pouces Voir aussi pour PMR R40 Pro:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 15
MAINE FEATURES:
PMR 446MHz
Output power: 0.5W
16 channels (8 PMR channels + 8 pre-programmed)
Communication range up to 10 km
PRODUCT DESCRIPTION
A - LED indicator. The LED turns red in emission and green in the reception.
B - Channel switch. Rotate this knob to change the channel. Channel no. 16 is the scanning channel.
C - Turn on / off radio and volume control. Turn this knob clockwise to turn on the station. Rotate completely
anti-clockwise to turn off the radio. When the radio is on, turn both ways to adjust the volume.
D - PTT (Push to talk). Press this button to emit, release the button to receive.
E - Monitor. The Monitor function allows you to deactivate the squelch temporarily in order to receive extremely
weak signals. Press and hold this button to hear the background noise. Release the button to return to normal
operation mode.
F - Flashlight. Press to turn the flashlight on.
G - Speaker and microphone 2 pin connector
SAFETY WARNINGS
Do not disassemble the radio casing. Do not repair the station by yourself, call a specialist center.
The device generates interference that may affect the operation of TVs or radios.
In case of interference, remove the PMR station from the affected device.
In order not to damage the radio station, do not use the station without an appropriate antenna
To avoid damaging the radio, do not emit too long
Close the radio if you are in a flammable or explosive environment
CHARGING THE BATTERY:
Follow the LED on the charger to find out the battery charge level:
- Red LED - the battery is charging
- Green LED - The battery is fully charged
1. Plug the charger into a power source with the included adapter
2. Insert the battery or the radio with the battery installed in the charger

User manual

EN
3

Publicité

Table des Matières
loading

Table des Matières