Custom Energy Savings Settings - GE RAK180W1 Manuel Du Propriétaire Et Instructions D'installation

Custom Energy Savings Settings

This thermostat comes preprogrammed to use a custom
energy setting. To change any of these presets, follow the
instructions below.
Accessing the Thermostat Settings
With the thermostat turned on, press and hold the
"Configuration" button until the first thermostat settings screen
appears. The thermostat must be turned on to access the
thermostat settings.
NOTE: If the thermostat is connected to a network, the
settings configured online will be applied.
• Use the "Up" and "Down" buttons to change the setting;
• Press the "F/C" button to advance to the next setting;
• Press the "Fan" button to return to the previous setting;
• Press the "Power" button to save and exit thermostat
settings.
19
49-5000416 Rev. 1