Panasonic AJ-CVF100G Mode D'emploi page 6

Parts and Their Functions
TALLY Switch
3
Controls the front tally lamp.
HIGH: Makes the front tally lamp brighter.
OFF: Turns the tally lamp off.
LOW: Makes the front tally lamp dimmer.
PEAKING Control
4
Adjusts the outlines of the images in the viewfinder to make focusing easier. The
setting of this control has no effect on the output signal of the camera.
CHROMA Control
5
Adjusts the chroma of the color for the image in the viewfinder. The setting of this
control has no effect on the output signal of the camera.
<Note>
In low temperature environments, the colors in the displayed image may be paler
immediately after switching on the power.
CONTRAST Control
6
Adjusts the contrast of the screen inside the viewfinder. The setting of this control has
no effect on the output signal of the camera.
BRIGHT (Brightness) Control
7
Adjusts the brightness of the screen inside the viewfinder. The setting of this control
has no effect on the output signal of the camera.
Front Tally Lamp
8
Lights when the camera is shooting and the TALLY switch is set to HIGH or LOW.
Also, flashes on and off as a warning indication, in the same manner as the REC lamp
inside the viewfinder.
The brightness of the front tally lamp is controlled by the setting of the TALLY switch
(HIGH or LOW).
Viewfinder Stopper
9
This is used to attach and detach the viewfinder.
Eyepiece
:
Back Tally Lamp
;
Lights when the camera is shooting. Also, flashes on and off as a warning indication, in
the same manner as the REC lamp inside the viewfinder.
The back tally lamp is hidden when the lever is in the OFF position.
Diopter Adjuster Ring
<
Adjust this control to match the vision of the person using the camera so that the image
on the screen in the viewfinder is as clear as possible.
Connection Plug
=
Lock Ring
>
Microphone Holder
?
Slide rail
@
E-5
(Continued)