Cleaning The Eyepiece - Panasonic AJ-CVF100G Mode D'emploi

Cleaning the Eyepiece

Remove the eyepiece to clean off any dust that got on the LCOS panel screen or mirror.
<Note>
Do not wipe the mirror surface under any circumstances as it has been specially treated.
Dust which has adhered to the mirror should be blown away with a blower, etc.
1
Turn the lock ring as far as
possible in the counterclockwise
direction to line up the alignment
marks on the lock ring and
viewfinder barrel.
2
Detach the eyepiece.
Remounting the Eyepiece
1
Line up the alignment marks on
the lock ring and the viewfinder
barrel and slide the eyepiece
back into place.
2
Turn the lock ring clockwise as
far as the
LOCK
E-11
position.
Alignment marks
Eyepiece
Lock ring