Additional Safety Features - SCHUBERTH R2 Manuel

C. THE HELMET
In the helmet interior, the head padding system
allows airflow to directly contact the surface of
the head, thereby providing faster dissipation
of inner heat. To regulate ventilation, a slider is
located on the air vent which is easy to operate
even with gloves on. Moving the slider back
opens the air vent completely.
VENTILATION DEVICE 4 –
INTERIOR AIR EXTRACTION
The R2 is equipped with an innovative air
extraction system. Fresh air flowing in through
the head vent is directed via the air channels in
the inner shell to the back of the helmet. The
reduced pressure that prevails at the back of the
helmet ensures that the air is constantly sucked
out through the air vents and special netting
material fitted to the neck pad, thus guaranteeing
a pleasant climate inside the helmet.

13. ADDITIONAL SAFETY FEATURES

REFLECTIVE PANELS
Black reflective patches in the neck pad and in the forehead area make
the motorcyclist more visible. With solid-colour helmets (no decals), the
SCHUBERTH logo on the back of the helmet is also made of reflective film.
Note:
Keep the reflective safety areas clean.
Note:
When riding in France, local law requires that further reflective safety
stickers be attached to the front, back and both sides of the helmet.
58