2. Engine choke
To start a cold engine, move the choke lever to the close position.
To restart a warm engine, leave the choke lever in the open position.
3. Primer
When the engine is cold the primer supplies the carburetor with more gasoline. When using the
primer it should not be pushed more than 3 times
Primer Pump
4. Throttle
Move the throttle lever about 1/3 away from the slow position towards the fast position.
5. Engine key
Put the ignition key in the keyhole and turn.
6. 230V electric starter
Plug the cord into electrical outlet and press the start button. After the engine is started remove
the plug from the socket alternatively pull the recoil starter to crank the engine
C
hoke Lever
Slow
Fast
31