oneConcept 10028180 Mode D'emploi page 6

1. Assembling castors: put the appliance on a flat surface, take out the wrench from foam box,
then assemble the castors.
2. Watering: pull 1/3 water tank, then add clean water. Pay attention to the level of water tank
when add water. The level of water tank should not over "MAX" scale at any time, when humidi-
fying, the total level of water tank should not below "MIN" scale.
3. Put ice or frozen ice box to the water tank if you want to strengthen the efficiency of cooling. But
the total level of water tank should not over "MAX" scale.
Controls
• 0 on control panel: Press the key, turn on the appliance, second press, shut it down.
• Speed: press this key, start the appliance, the corresponding function changes as follows when
you press the key serially: 1 > 2 > 3 > 1.
• Swing: press this key, the wind direction can swing flatly, and the swing indicator light is on. It
cancels this function when you press again. NOTE: You also can swing the blades transversely by
your hands, choose the wind direction up and down.
• Cool: press the key to start cooling system. It cancels this function when you press again. IMPOR-
TANT: Please be sure there is enough water in the water tank before press this key. DO NOT PRESS
THE KEY "COOL" WITHOUT OF WATER!
Product Description
Before first Use
Use and Operation
6