Publicité
Les langues disponibles
Les langues disponibles
• Refer to the following table for
wall-mount hole pattern.
Model Name
KD-65X75K /
KD-55X75K
• Be sure to store the unused screws and
Table-Top Stand in a safe place until you
are ready to attach the Table-Top Stand.
Keep the screws away from small
children.
Note
• Read the supplied safety documentation for
additional safety information.
• For more detailed information, visit Sony
Customer Support website.*
* Only for limited region/country/model.
1
Remove the screws from the rear of
the TV.
Wall-mount hole
pattern
×
400 × 200 mm
2
Attach the Wall-Mount Bracket (not
supplied) using the screws (not
supplied).
Note
• If using an electric screwdriver, set the
torque at approximately 1.2 N·m {12 kgf·cm}.
• Be sure to fasten the Wall-Mount
Attachment when attaching them to the TV.
Use only a flat head screwdriver to install
the Wall-Mount Attachment. Use of another
tool might result in over torqueing the
Wall-Mount Attachment and damaging the
TV.
Wall-Mount Bracket
(not supplied)
Screw
(not supplied)
7
US
US
Publicité
