Finishing; Secondary Air Tubes; Door Installation - Timberwolf EPI22-1 Manuel D'installation Et D'utilisation

4.0 fi nishing
EN
4.1

secondary air tubes

A.
Start at the back working forwards, install the secondary air tube by inserting the tube into the hole (Fig.
4-1).
B.
Slide the tube into the opposite hole. With the holes on the secondary air tube pointing forward, align the
tube with the tube retainer and insert the cotter pin (Fig. 4-2).
C.
Spread the cotter pin to retain.
note:
There are 4 secondary air tubes. One of the tubes has larger holes. This tube is to be located closest to
the front of the appliance (Fig. 4-3).
4.2

door installation

Hang the door using the hinge pins supplied.
14
W415-2799 / B / 03.10.20
B
Fig. 4-2
TUBE
RETAINER
COTTER PIN
A
Fig. 4-1
C
Fig. 4-3
HOLE