Human Touch zeroG 5.0 Manuel D'utilisation Et D'entretien page 4

get ready
Unpack the box
Chair Base
1. Power on
Plug the power cord into a grounded power
source. Turn the master power switch (on
the left-hand side of the chair) to On.
2. Use the incline button on the controller to raise the chair to
the upright position.
NOTE: When you press the incline button,
the footrest raises before the backrest
inclines; this is a safety feature.
humantouch.com
Head Pillow
4
Setting up your Human Touch Massage Chair is easy.
attach the head pillow, and you're done!
3. Attach the head pillow.
Feed the head pillow tongue behind the
two head pillow straps from the top. Fold
the bottom of the flap upward and attach
it to the head pillow using the zipper.
Head pillow tongue
Just
Head pillow
Head pillow
Bottom of the flap
5