VINCENT SV-236MK Manuel D'utilisation page 34

CONNECTIONS FOR THE STANDBY CONTROL
SV-236MK
Many devices which can be controlled by a switching signal (not preamplifiers or integrated ampli-
fiers), have two terminals which do not differentiate between input and output. In this case either of
the two can be selected.
"POWER CONTROL" sockets of preamplifiers or integrated amplifiers must not be interconnected!
All receiving devices must not be connected to more than one preamplifier or integrated amplifier
(directly or indirectly)!
CONNECTION OF THE POWER CABLE
Check whether the wall socket provides the appropriate mains power, which is the case if it is supplied
with 230 V AC 50 Hz. Push the plug on the power cable supplied firmly into the power socket (14) on
the back of the appliance. Plug the other end of the power cable into a mains socket.
Vincent
34
(POWER CONTROL)
power control cable
e.g. CD player
e.g. main amplifier