Lifetime 6405 Instructions D'assemblage
  1. Manuels
  2. Marques
  3. Lifetime Manuels
  4. Rangement extérieur
  5. 6405
  6. Instructions d'assemblage

Lifetime 6405 Instructions D'assemblage

Masquer les pouces Voir aussi pour 6405:
Table des Matières

Publicité

Liens rapides

Télécharger ce manuel
8' x 10'
STORAGE SHED
MODEL #60091
MODEL 6405
BEFORE ASSEMBLY:
• Assemble on a level surface
• 3 adults recommended for setup
• Videos and help guides available. Scan the code
below to see how it all comes together.
http://go.lifetime.com/6405playlist
Importado por:
LPI de México S. de R. L. de C.V.
Decada # 5005
Parque Industrial Milenium
Apodaca, N.L. México C.P. 66600
RFC: LME070821UG6
Teléfono: +52 (81) 8145 0650
NINGUNA GARANTÍA OFRECIDA POR EL FABRICANTE ES VÁLIDA EN MÉXICO
FOR DOMESTIC USE ONLY!
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.
TOOLS REQUIRED
QUESTIONS?
CONTACT LIFETIME CUSTOMER SERVICE:
Call: 1-800-225-3865
7:00 am-5:00 pm (Monday-Friday) MST
and 9:00 am-1:00 pm Saturday MST
Live Chat: www.lifetime.com
(click on "Ask An Expert" tab)
Video Instructions:
www.youtube.com/lifetimeproducts
ASSEMBLY INSTRUCTIONS
Pour le français, voir la page 2. Para el español, ver la página 3.
For Customer Service in mainland Europe:
E-mail: cs@lifetimeproducts.eu
5/16" (8 mm) Wood Drill Bit
5/16" (8 mm) Masonry Drill Bit
MODEL# AND PRODUCT ID
Model Number: 6405
Product ID:
TABLE OF CONTENTS
Icon Legend...............................4
Warnings & Notices.....................5
Platform Construction.................6
Truss Assembly.........................11
Gable Assembly........................16
Door Assembly..........................20
Floor Assembly.........................29
Wall Assembly...........................32
Shelving Installation.................37
Parts Identifi er..........................39
Door & Gable Installation...........46
Roof Assembly..........................50
Door Alignment........................67
Shed Anchoring........................69
Cleaning & Care........................75
Registration...........................76
Warranty..............................77
(you will need both when contacting us)

Publicité

Table des Matières
loading

Manuels Connexes pour Lifetime 6405

Sommaire des Matières pour Lifetime 6405

  • Page 1: Table Des Matières

    Shed Anchoring......69 Cleaning & Care......75 5/16” (8 mm) Masonry Drill Bit Registration......76 Warranty......77 QUESTIONS? CONTACT LIFETIME CUSTOMER SERVICE: Live Chat: www.lifetime.com MODEL# AND PRODUCT ID Call: 1-800-225-3865 (you will need both when contacting us) (click on “Ask An Expert” tab) Model Number: 6405 7:00 am–5:00 pm (Monday–Friday) MST...
  • Page 2 Nettoyage et entretien....75 Enregistrement......76 Garantie......79 ® QUESTIONS ? CONTACTER LES SERVICES À LA CLIENTÈLE LIFETIME N° DE MODÈLE ET RÉFÉRENCE DU PRODUIT t’Chat en direct: www.lifetime.com Composer le 1-800-225-3865 (vous aurez besoin des deux lorsque vous nous contactez) (cliquer sur la languette « Ask An Expert ») N°...
  • Page 3 5/16” (8 mm) Broca de albañilería Registro........76 Garantía........78 ® ¿PREGUNTAS? PONERSE EN CONTACTO CON LOS SERVICIOS DE CLIENTES LIFETIME MODEL E ID DEL PRODUCTO Chat en vivo: www.lifetime.com Llamar : 1-800-225-3865 (necesitará los dos al contactarnos) (cliquear en la lengüeta «Ask An Expert») Número de modelo: 6405...
  • Page 4 ICON LEGEND / LÉGENDE DES ICÔNES / LEYENDA DE ÍCONOS • Indicates special heed should be taken when reading. • Indique qu’une attention spéciale doit être prise lors de la lecture. • Indica que uno debe prestar atención al leer. •...
  • Page 5 WARNINGS & NOTICES / AVERTISSEMENTS ET AVIS / ADVERTENCIAS Y AVISOS English: • Failure to follow these warnings may result in serious injury or property damage and will void warranty. • To ensure safety, do not attempt to assemble this product without following the instructions carefully. •...
  • Page 6 PLATFORM CONSTRUCTION / CONSTRUCCIÓN DE LA PLATAFORMA / CONSTRUCTION DE LA PLATE-FORME • You must provide a platform on which to assemble your shed. Proper building permit documentation may be required in your neighborhood. Consult all local building codes prior to assembling the shed. Before beginning assembly, you must pour or construct a platform.
  • Page 7 SECTION 1 (CONTINUED) / SECCIÓN 1 (CONTINUACIÓN) SECTION 1 (SUITE) CONCRETE REQUIRED / CONCRETO REQUERIDO BÉTON REQUIS 1 yd (0,77 m CONCRETE PLATFORM / PLATAFORMA DE CONCRETO PLATE-FORME EN BÉTON • The concrete should be approximately 4” (10,2 cm) thick. The actual dimensions of the shed, at its widest and longest points, are 96”...
  • Page 8 SECTION 1 (CONTINUED) / SECCIÓN 1 (CONTINUACIÓN) SECTION 1 (SUITE) WOOD REQUIRED / MADERA REQUERIDA BOIS REQUIS WOOD PLATFORM / PLATAFORMA DE MADERA PLATE-FORME EN BOIS • All lumber must be rated for outdoor use! The actual dimensions of the shed, at its widest and longest points, are 96” x 120”...
  • Page 9 SECTION 1 (CONTINUED) / SECCIÓN 1 (CONTINUACIÓN) SECTION 1 (SUITE) TOOLS, PARTS, AND HARDWARE REQUIRED / INSTRUMENTAL, PIEZAS, Y HERRAJE REQUERIDOS OUTILS, PIÈCES, ET QUINCAILLERIE REQUIS 2” x 4” x 118 1/4” (5,1 cm x 10,2 cm x 3,00 m) (x2) 2”...
  • Page 10 SECTION 1 (CONTINUED) / SECCIÓN 1 (CONTINUACIÓN) SECTION 1 (SUITE) TOOLS, PARTS, AND HARDWARE REQUIRED / INSTRUMENTAL, PIEZAS, Y HERRAJE REQUERIDOS OUTILS, PIÈCES, ET QUINCAILLERIE REQUIS 22 1/4” x 93 1/2” x 3/4” (57 cm x 2,38 m x 19,1 mm) (x1) 48”...
  • Page 11 TRUSS ASSEMBLY / ASSEMBLAGE DES FERMES / ENSAMBLE DE LAS CERCHAS HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO Hardware Bag / Sac de quincaillerie / Bolsa de herraje DTK (x12) ADY (x12) ADJ (x6) ADK (x24) 11 9/16 in/po (29,4 cm) ADH (x3) AIP (x3) PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS...

  • Page 12: Truss Assembly

    (DRS) como se muestra. • Si tiene problemas con esta sección, siga el código debajo para ver un video sobre el ensamble en esta sección. http://go.lifetime.com/8trussassembly • Slide a Large Truss Brace (AFG) onto the Truss • Attach the Connector using the hardware Gutter Channels as shown, and align the holes.
  • Page 13 SECTION 2 (CONTINUED) / SECTION 2 (SUITE) SECCIÓN 2 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 3/8 in/po (10 mm) ADY (x12) ADK (x12) • Attatch the Large Truss Brace using the hardware included. Do not overtighten the Cap Nuts. •...
  • Page 14 SECTION 2 (CONTINUED) / SECTION 2 (SUITE) SECCIÓN 2 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 7/16 in/po (x2) (11 mm) (x2) ADJ (x6) 11 9/16 in/po (29,4 cm) ADH (x3) • Slide a Truss Rod (ADH) through the holes in the Truss Brace and Connector. Secure with two Cap Nuts (ADJ). Do not overtighten the Nuts.
  • Page 15 SECTION 2 (CONTINUED) / SECTION 2 (SUITE) SECCIÓN 2 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS • Repeat steps 2.1–2.5 two times. • Répétez les étapes 2.1 – 2.5 deus fois. • Repita los pasos 2.1–2.5 dos veces.

  • Page 16: Gable Assembly

    GABLE ASSEMBLY / ASSEMBLAGE DES PIGNONS / ENSAMBLE DE LAS FACHADAS HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO Hardware Bag / Sac de quincaillerie Bolsa de herraje ADW (x10) ADV (x12) ADZ (x8) ACB (x2) AEE (x10) AHS (x4) AIQ (x2) AGP (x2) PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS...
  • Page 17 SECTION 3 (CONTINUED) / SECTION 3 (SUITE) SECCIÓN 3 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x4) • Align the holes in the Left (AGH) and Right (AGI) Rear Gable Halves. • Aligner les trous dans les pignons gauche (AGH) et droite (AGI). •...
  • Page 18 SECTION 3 (CONTINUED) / SECTION 3 (SUITE) SECCIÓN 3 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADW (x10) AEE (x10) AHS (x2) • Secure with the hardware included. • Place the Screen (AIQ) over the Vent (AGP) and align •...
  • Page 19 SECTION 3 (CONTINUED) / SECTION 3 (SUITE) SECCIÓN 3 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADV (x6) • Align the holes in the Tube with those in the Gable. • Aligner les trous dans le tube avec ceux du pignon. •...
  • Page 20 LEFT DOOR ASSEMBLY / ASSEMBLAGE DE LA PORTE GAUCHE / ENSAMBLE DE LA PUERTA IZQUIERDA HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO Hardware Bag / Sac de quincaillerie Bolsa de herraje AEE (x3) ADW (x3) ADJ (x2) ABU (x2) AHZ (x1) AHM (x2) AIA (x1)
  • Page 21 (BDJ). http://go.lifetime.com/leftdoor8foot • Door Channels (BLH) are bowed by design, ensuring a tight fi t when they are closed and latched, making your shed more secure. These channels are formed with a slight bend to the adjoining door edge—like parentheses facing each other: ( ).
  • Page 22 SECTION 4 (CONTINUED) / SECTION 4 (SUITE) SECCIÓN 4 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS AHM (x2) DZG (x1) • Set the Deadbolts (AHM) down into the recesses at the top and bottom of the Door. Then, slide the Door End Channel (BLH) over the edge of the Door and the bottom of the Deadbolts as shown.
  • Page 23 SECTION 4 (CONTINUED) / SECTION 4 (SUITE) SECCIÓN 4 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 7/16 in/po (11 mm) ADW (x3) ADJ (x2) ABU (x2) AHZ (x1) AEE (x3) AIA (x1) • Attach the Door Latch (AIA) to the Door using the hardware included. Do not overtighten. •...
  • Page 24 RIGHT DOOR ASSEMBLY / ASSEMBLAGE DE LA PORTE DROITE / ENSAMBLE DE LA PUERTA DERECHA HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO Hardware Bag / Sac de quincaillerie Bolsa de herraje ADB (x2) AEE (x5) AAB (x2) AEB (x2) AHY (x1) ADW (x4) ABV (x2)
  • Page 25 (BDK). http://go.lifetime.com/rightdoor8ft • Door Channels (BLH) are bowed by design, ensuring a tight fi t when they are closed and latched, making your shed more secure. These channels are formed with a slight bend to the adjoining door edge—like parentheses facing each other: ( ).
  • Page 26 SECTION 5 (CONTINUED) / SECTION 5 (SUITE) SECCIÓN 5 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS AIK (x1) AEE (x3) AIO (x1) ADW (x3) • Slide the Thumb Lever (AIO) down into the grooves •...
  • Page 27 SECTION 5 (CONTINUED) / SECTION 5 (SUITE) SECCIÓN 5 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 7/16 in/po (11 mm) ABV (x2) AIL (x1) AAB (x2) AHX (x1) ADB (x2) AEB (x2) AHV (x1) •...
  • Page 28 SECTION 5 (CONTINUED) / SECTION 5 (SUITE) SECCIÓN 5 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS AHY (x1) AHW (x1) ADW (x1) • Attach the Bracket (AHW) using a Screw (ADW), and attach the Spring (AHY).

  • Page 29: Floor Assembly

    FLOOR ASSEMBLY / ASSEMBLAGE DU PLANCHER / ENSAMBLE DEL PISO HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO Hardware Bag / Sac de quincaillerie Bolsa de herraje ADC (x1) BQC (x20) AHO (x2) Note: These Screws do not anchor the Floor; they only hold the Panels together. Remarque : Ces vis n’ancrent pas le plancher ;...
  • Page 30 (CUW). Las lengüetas se 45° entrelazan las http://go.lifetime.com/8x10fwfl oor unas con las otras. Aplane el panel. • Attach the second Inner Floor Panel (CUD) to the • Then, attach an Outer Floor Panel (CUW) to the Inner fi...
  • Page 31 SECTION 6 (CONTINUED) / SECTION 6 (SUITE) SECCIÓN 6 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS BQC (x18) • Finally, insert the Screws (BQC) through the divots in the Floor Panels and into the tabs of the adjacent Floor Panels. (The divots are near the seams of the Floor Panels.) •...

  • Page 32: Wall Assembly

    WALL ASSEMBLY / ASSEMBLAGE DES MURS / ENSAMBLE DE LOS MUROS HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO Hardware Bag / Sac de quincaillerie Bolsa de herraje ADZ (x58) PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS Plastic Parts / Pièces en plastique Piezas de plástico AHD (x7)
  • Page 33 SECTION 7 (CONTINUED) / SECTION 7 (SUITE) SECCIÓN 7 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS • Insert the two left-most tabs at the bottom of the Corner Panel (AGY) into the two right-most slots along the edge of the Floor.
  • Page 34 SECTION 7 (CONTINUED) / SECTION 7 (SUITE) SECCIÓN 7 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS AIW (x1) ADZ (x15) • Bend Corner Panel, and pull down on the Panel to snap the remaining tabs in place. To help with insertion, place the Wood Block (AIW) under the Floor Panel directly under the tab being inserted.
  • Page 35 SECTION 7 (CONTINUED) / SECTION 7 (SUITE) SECCIÓN 7 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS AIW (x1) ADZ (x35) • Insert this Corner Wall Panel (AGW) in the same way • Insert these Wall Panels (AHD) in the same way as the previous ones.
  • Page 36 SECTION 7 (CONTINUED) / SECTION 7 (SUITE) SECCIÓN 7 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS AIW (x1) ADZ (x5) • Insert this Corner Wall Panel (AGN) in the same way as the fi rst one. •...

  • Page 37: Shelving Installation

    SHELVING INSTALLATION / INSTALLATION DU RAYONNAGE / INSTALACIÓN DE LA ESTANTERÍA HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO Hardware Bag / Sac de quincaillerie Bolsa de herraje AIY (x6) ADZ (x42) ADZ (x8) PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS Metal Parts / Pièces en métal Piezas de metal...
  • Page 38 SECTION 8 (CONTINUED) / SECTION 8 (SUITE) SECCIÓN 8 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x8) • The right Wall/Shelf Support Channel (AFM) goes in the slot directly under the notch in the Wall Panel. The left Wall Support Channel goes in the slot to the right of the notch in the Wall Panel.
  • Page 39 PARTS IDENTIFIER / IDENTIFICADOR DE PIEZAS / IDENTIFICATEUR DE PIÈCES CONTENTS OF BOX 1 / CONTENIDO DE LA CAJA 1 CONTENU DE LA BOÎTE 1 BDJ (x1) BDK (x1) AFV (x1) AFY (x3) AGF (x1) AGH (x1) AGI (x1) AGQ (x8) CUW (x2) CUZ (x2)
  • Page 40 PARTS IDENTIFIER / IDENTIFICADOR DE PIEZAS / IDENTIFICATEUR DE PIÈCES METAL PARTS KIT 1 / JUEGO DE PIEZAS DE METAL 1 KIT PIÈCES EN MÉTAL 1 75 1/2 in/po (1,92 m) BLH (x2) 50 9/16 in/po (1,28 m) DSR (x2) 59 1/2 in/po (1,51 m) AFE (x1) 48 in/po (1,22 m)
  • Page 41 PARTS IDENTIFIER / IDENTIFICADOR DE PIEZAS / IDENTIFICATEUR DE PIÈCES CONTENTS OF BOX 2 / CONTENIDO DE LA CAJA 2 CONTENU DE LA BOÎTE 2 AGL (x1) AGN (x1) AGW (x1) AGY (x1) AFS (x2) AHD (x7) AHH (x1) CONTENTS OF SMALL PARTS BOX / CONTENIDO DE LA CAJA DE PIEZAS PEQUEÑAS CONTENU DE LA BOÎTE DE PETITES PIÈCES AFU (x2)
  • Page 42 PARTS IDENTIFIER / IDENTIFICADOR DE PIEZAS / IDENTIFICATEUR DE PIÈCES CONTENTS OF SMALL PARTS KIT / CONTENIDO DEL JUEGO DE PIEZAS PEQUEÑAS CONTENU DU KIT PETITES PIÈCES AFL (x8) AGG (x1) AFW (x1) AHE (x1) AHC (x4) AFZ (x2) HARDWARE BAGS / BOLSAS DE HERRAJE SACS DE QUINCAILLERIE...
  • Page 43 SECTION 8 (CONTINUED) / SECTION 8 (SUITE) SECCIÓN 8 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x6) • Insert the Shelf Brackets (AIY) into the slots in the Wall/Shelf Support Channels. The Brackets must be at the same height. •...
  • Page 44 SECTION 8 (CONTINUED) / SECTION 8 (SUITE) SECCIÓN 8 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x8) • Insert two (2) Shelf Brackets (AIY) into the slots in the Wall/Shelf Support Channels. The Shelf Brackets must be at the same height.
  • Page 45 SECTION 8 (CONTINUED) / SECTION 8 (SUITE) SECCIÓN 8 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x8) • Select the corner in which you would like to install a Corner Shelf (AFZ). In this image, the shelf is shown above the Long Shelf.
  • Page 46 DOOR & ENTRY GABLE INSTALLATION / INSTALLATION DU PIGNON D’ENTRÉE ET DES PORTES / INSTALACIÓN DE LA FACHADA DE ENTRADA Y LAS PUERTAS HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO Hardware Bag / Sac de quincaillerie Bolsa de herraje ADX (x4) AHP (x2) AIC (x1)
  • Page 47 SECTION 9 (CONTINUED) / SECTION 9 (SUITE) SECCIÓN 9 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS AHP (x2) • Pull the Hinge Tube down out of the Door about six inches. Align the hole at the bottom of the Hinge Tube with the slit in the Bushing, and insert the Tube.
  • Page 48 SECTION 9 (CONTINUED) / SECTION 9 (SUITE) SECCIÓN 9 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x6) • Slide the holes in the Entry Gable down over the two Hinge Tubes. • Faites glisser les trous dans le toit à pignon d’entrée sur les deux tubes. •...
  • Page 49 SECTION 9 (CONTINUED) / SECTION 9 (SUITE) SECCIÓN 9 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADX (x4) AIC (x1) AIM (x1) • Attach the Left (AIC) and Right (AIM) Gap Flaps to the corners of the Doors using the hardware included. These Flaps simply serve to block out light.

  • Page 50: Roof Assembly

    ROOF ASSEMBLY / ENSAMBLE DEL TEJADO / ASSEMBLAGE DU TOIT HARDWARE REQUIRED / HERRAJE REQUERIDO / QUINCAILLERIE REQUISE Hardware Bag / Bolsa de herraje Sac de quincaillerie ADX (x24) ADZ (x126) AED (x24) AXX (x2) PARTS REQUIRED / PIEZAS REQUERIDAS / PIÈCES REQUISES Metal Part / Pieza de metal Pièce en métal...
  • Page 51 SECTION 10 (CONTINUED) / SECCIÓN 10 (CONTINUACIÓN) SECTION 10 (SUITE) TOOLS AND HARDWARE REQUIRED / INSTRUMENTAL Y HERRAJE REQUERIDOS OUTILS ET QUINCAILLERIE REQUIS 10.1 • Set a Truss Assembly into the notches on the fi rst two opposite Wall Panels. Set a Roof Panel (AGQ) onto the Gable, Wall Panel, and Truss Assembly.
  • Page 52 SECTION 10 (CONTINUED) / SECCIÓN 10 (CONTINUACIÓN) SECTION 10 (SUITE) TOOLS AND HARDWARE REQUIRED / INSTRUMENTAL Y HERRAJE REQUERIDOS OUTILS ET QUINCAILLERIE REQUIS ADZ (x4) 10.3 • Align the four holes in the Wall Panel with those at the bottom of the Roof Panel, and insert four (4) Screws (ADZ) to secure the Panel in place.
  • Page 53 SECTION 10 (CONTINUED) / SECCIÓN 10 (CONTINUACIÓN) SECTION 10 (SUITE) TOOLS AND HARDWARE REQUIRED / INSTRUMENTAL Y HERRAJE REQUERIDOS OUTILS ET QUINCAILLERIE REQUIS ADZ (x4) 10.4 • Insert the fi rst two Screws (ADZ) through the Gable and into the Roof Panel and the frist two Screws (ADZ) through the Truss and the Roof Panel at the locations indicated.
  • Page 54 SECTION 10 (CONTINUED) / SECCIÓN 10 (CONTINUACIÓN) SECTION 10 (SUITE) TOOLS AND HARDWARE REQUIRED / INSTRUMENTAL Y HERRAJE REQUERIDOS OUTILS ET QUINCAILLERIE REQUIS ADZ (x3) 10.5 • Insert the Roof Support (AFL) into the notches in the Gable and between the Truss and the Roof Panel. Insert three (3) more Screws (ADZ) to secure the Panel in place.
  • Page 55 SECTION 10 (CONTINUED) / SECCIÓN 10 (CONTINUACIÓN) SECTION 10 (SUITE) TOOLS AND HARDWARE REQUIRED / INSTRUMENTAL Y HERRAJE REQUERIDOS OUTILS ET QUINCAILLERIE REQUIS ADZ (x11) 10.6 • Repeat steps 10.2–10.5 for the second front Roof Panel. • Repita los pasos 10.2–10.5 para el segundo Panel de tejado delantero. •...
  • Page 56 SECTION 10 (CONTINUED) / SECCIÓN 10 (CONTINUACIÓN) SECTION 10 (SUITE) TOOLS AND HARDWARE REQUIRED / INSTRUMENTAL Y HERRAJE REQUERIDOS OUTILS ET QUINCAILLERIE REQUIS ADZ (x40) 10.7 • Repeat the previous steps for the center Roof Panels. • Repita los pasos anteriores para los Paneles de tejado centrales. •...
  • Page 57 SECTION 10 (CONTINUED) / SECCIÓN 10 (CONTINUACIÓN) SECTION 10 (SUITE) TOOLS AND HARDWARE REQUIRED / INSTRUMENTAL Y HERRAJE REQUERIDOS OUTILS ET QUINCAILLERIE REQUIS ADZ (x14) 10.8 • Attach the Rear Gable to the Shed using fourteen (14) Screws (ADZ). • Sujete la Fachada trasera a la casita usando catorce (14) Tornillos (ADZ). •...
  • Page 58 SECTION 10 (CONTINUED) / SECCIÓN 10 (CONTINUACIÓN) SECTION 10 (SUITE) TOOLS AND HARDWARE REQUIRED / INSTRUMENTAL Y HERRAJE REQUERIDOS OUTILS ET QUINCAILLERIE REQUIS ADZ (x22) 10.9 • Attach the last two Roof Panels to the Shed in the same way you did the fi rst two. •...
  • Page 59 SECTION 10 (CONTINUED) / SECCIÓN 10 (CONTINUACIÓN) SECTION 10 (SUITE) TOOLS AND HARDWARE REQUIRED / INSTRUMENTAL Y HERRAJE REQUERIDOS OUTILS ET QUINCAILLERIE REQUIS ADZ (x28) 10.10 • Starting at the front, attach the Roof Caps to the shed using the hardware included. •...
  • Page 60 SECTION 10 (CONTINUED) / SECCIÓN 10 (CONTINUACIÓN) SECTION 10 (SUITE) TOOLS AND HARDWARE REQUIRED / INSTRUMENTAL Y HERRAJE REQUERIDOS OUTILS ET QUINCAILLERIE REQUIS ADX (x24) AXX (x2) AED (x24) 10.11 • Fold a Skylight (AHC), and attach it to the Roof using six (6) Screws (ADX) and Washers (AED) for each Skylight. •...

  • Page 61: Window Pane Installation

    WINDOW PANE INSTALLATION / INSTALLATION DU CARREAU / INSTALACIÓN DE LA HOJA DE VENTANA HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO Hardware Bag / Sac de quincaillerie Bolsa de herraje AIS (x2) ADZ (x4) ADY (x1) PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS Plastic Part / Pièce en plastique Pieza de plástico...
  • Page 62 SECTION 11 (CONTINUED) / SECTION 11 (SUITE) SECCIÓN 11 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADY (x1) 11.1 • Peel off the protective backing from both sides of the Window (AHE). • Retirez la pellicule protectrice des deux côtés du carreau (AHE). •...
  • Page 63 SECTION 11 (CONTINUED) / SECTION 11 (SUITE) SECCIÓN 11 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x4) AIS (x2) 11.4 • Attach the two (2) Window Latches (ADY) at the top corners of the Window. •...

  • Page 64: Pegboard Strip Installation

    PEGBOARD STRIP INSTALLATION / INSTALLATION DE L’ORGANISEUR D’OUTILS / INSTALACIÓN DEL ORGANIZADOR DE HERRAMIENTAS HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO Hardware Bag / Sac de quincaillerie Bolsa de herraje AIJ (x2) ADW (x10) AIG (x1) AIH (x3) AIF (x1) AII (x3) PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS Plastic Parts /...
  • Page 65 SECTION 12 (CONTINUED) / SECTION 12 (SUITE) SECCIÓN 12 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADW (x10) 12.1 • Attach the Pegboard Strip (AFU) to a Wall Panel using fi ve (5) Screws (ADW). Avoid Corner Wall Panels and Window Wall Panels.
  • Page 66 SECTION 12 (CONTINUED) / SECTION 12 (SUITE) SECCIÓN 12 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS AIG (x1) AIF (x1) AIH (x3) AII (x3) AIJ (x2) 12.2 • Insert the various Hooks (AIF, AIG, AIH, AII, AIJ) as shown. •...

  • Page 67: Door Alignment

    DOOR ALIGNMENT / ALIGNEMENT DES PORTES / ALINEACIÓN DE LAS PUERTAS HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO NO HARDWARE INCLUDED FOR THIS SECTION AUCUNE QUINCAILLERIE INCLUSE POUR CETTE SECTION NINGÚN HERRAJE INCLUIDO PARA ESTA SECCIÓN PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS Wood Parts / Pièces en bois Piezas de madera...
  • Page 68 SECTION 13 (CONTINUED) / SECTION 13 (SUITE) SECCIÓN 13 (CONTINUACIÓN) TOOLS AND HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS AIX (x4) 13.1 • If the Doors are not level, follow the steps on this page or the next to even them out. •...

  • Page 69: Shed Anchoring

    SHED ANCHORING / ANCRAGE DE L’ABRI / ANCLAJE DE LA CASETA HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO NO HARDWARE INCLUDED FOR THIS SECTION AUCUNE QUINCAILLERIE INCLUSE POUR CETTE SECTION NINGÚN HERRAJE INCLUIDO PARA ESTA SECCIÓN PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS NO PARTS REQUIRED FOR THIS SECTION AUCUNE PIÈCE REQUISE POUR CETTE SECTION NINGUNA PIEZA REQUERIDA PARA ESTA SECCIÓN...
  • Page 70 SECTION 14 (CONTINUED) / SECTION 14 (SUITE) SECCIÓN 14 (CONTINUACIÓN) FOR CONCRETE PLATFORMS / POUR LES PLATE-FORMES EN BÉTON PARA PLATAFORMAS DE CONCRETO 5/16 in/po (8 mm) 14.1 • To anchor your shed, you must purchase the correct anchoring hardware. For a concrete platform, we recommend using a hammer drill, 5/16"...
  • Page 71 SECTION 14 (CONTINUED) / SECTION 14 (SUITE) SECCIÓN 14 (CONTINUACIÓN) FOR WOOD PLATFORMS / POUR LES PLATE-FORMES EN BOIS PARA PLATAFORMAS DE MADERA 5/16 in/po (8 mm) 14.1 • To anchor your shed, you must purchase the correct anchoring hardware. For a wood-framed platform, we recommend using a drill, 5/16"...
  • Page 72 NOTES / REMARQUES / NOTAS...
  • Page 73 NOTES / REMARQUES / NOTAS...
  • Page 74 NOTES / REMARQUES / NOTAS...

  • Page 75: Cleaning & Care

    Congratulations on your Lifetime ® product purchase. By following the instructions below, your new Lifetime product should provide you with years of service and enjoyment. The polyethylene panels are stain and solvent resistant. Most stains can be removed using a mild soap and a soft-bristled brush.
  • Page 76 REGISTER today! ENREGISTREZ VOTRE PRODUIT EN LIGNE À WWW.LIFETIME.COM Chez Lifetime®, nous nous engageons à fournir des produits innovateurs de qualité. Lors de votre inscription, vous aurez l’occasion de nous faire parvenir vos commentaires. Votre opinion est importante pour nous.
  • Page 77 All merchandise is sold on this condition, and no representative of the company may waive or change this policy. 5. This product is not intended for institutional or commercial use; Lifetime Products, Inc. does not assume any liability for such use. Institutional or commercial use will void the warranty.
  • Page 78 NO ESTÁN DISPONIBLES O SON OBSOLETAS. 1. El comprador original recibe la garantía de que las casetas Lifetime estarán libres de defectos de material o de mano de obra por un período de 10 años a contar desde la fecha de la compra original. La palabra “defectos” se defi ne como imperfecciones que perjudican el uso del producto.
  • Page 79 2. Cette garantie n’est pas transférable et est expressément limitée à la réparation ou au remplacement du produit défectueux. © Si le produit est déclaré défectueux selon les termes de cette garantie, Lifetime Products, Inc. réparera ou remplacera les parties défectueuses gratuitement pour l’acheteur. Les frais d’expéditions aller et retour de l’usine ne sont pas couverts et sont à...
  • Page 80 ® MEJORAR LA COMPRA DE LIFETIME AGREGANDO ACCESORIOS U OTROS MARAVILLOSOS PRODUCTOS Para comprar accesorios u otros productos de Lifetime®, visitarnos en: www.lifetime.com O marcar al: 1-800-424-3865 De lunes hasta viernes 7:00 hr–17:00 hr Horario Éstandar de la Montaña (MST) y sábados 9:00 hr–13:00 hr (MST)

Table des Matières