Publicité
Les langues disponibles
Les langues disponibles
Towbar accessories:
After install the towbar you should get adequate registration in registration book
(at authorised service station).The car should be equipped with:
•
Indicators
•
Tow mirrors
After 1000km check all screws. The ball of towbar must be always kept clear and
conserve with a grease.
NOTE
Towing hitch (without electrical set)
Cat. no. F 29A
Class: A50-X
Designed for:
Manufacturer: PEUGEOT
Model: 407
Type: 4 DOORS
produced since 2004
Approval number acc. to regulations EKG/ONZ 55.01: E20 55R-01 1607
Torque settings for nuts and bolts (8,8):
M 8
25 Nm
M 12 85 Nm
This towbar is designed according to rules of safety traffic regulations. The towing
hitch is a safety component and must be installed only by qualified personnel. Any
alteration or conversion to the towing hitch is prohibited and would lead to
cancellation of design certification. Remove insulating compound and under seal
from vehicle (if present) in the area of the matting surfaces of the towing hitch.
The vehicle manufacturer's specifications regarding trailer load and max. vertical
cup load are decisive for driving, and values for the towing hitch cannot be
exceeded.
D-value formula:
Max trailer weight [kg] x
Max vehicle weight [kg]
Max trailer weight [kg]
+
Max vehicle weight [kg]
PPUH AUTO-HAK S.J.
Produkcja Haków Holowniczych
Henryk & Zbigniew Nejman
76-200 SŁUPSK ul. Słoneczna 16K
tel/fax (059) 8-414-414; 8-414-413
E-mail: office@autohak.com.pl
www. autohak.com.pl
Technical data:
D-value: 9,1 kN
maximum trailer weight: 1600 kg
maximum vertical cup load: 65 kg
M 10 55 Nm
M 14 135 Nm
Foreword
9,81
=
D [kN]
X
1000
Publicité
