Towbar accessories:
Towing hitch (without electrical set)
Cat. no. D04
Class: A50-X
Designed for:
Manufacturer: MERCEDES 190
Model: 4 drz. (W201)
produced since 10.1982 till 09.1988
Approval number acc. to regulations EKG/ONZ 55.01: E20-55R-01 1029
This towbar is designed according to rules of safety traffic regulations. The towing
hitch is a safety component and can be install only by qualified personnel. Any
alteration or conversion of the towing hitch is prohibited and would lead to
cancellation of design certification. Remove insulating compound and underseal
from vehicle (if present) in the area of the matting surfaces of the towing hitch.
The vehicle manufacturer's specifications regarding trailer load and max. vertical
cup load are decisive for driving whereat values for the towing hitch cannot be
exceeded.
D-value formula:
Max trailer weight [kg] x
+
Max trailer weight [kg]
Thank you for buying our product. Their reliability has been confirmed in
many tests. Reliability of towbar depends also on correct assembly and right
operation. For this reasons we kindly ask to read carefully this instruction and
apply to hints.
The towbar should be install in points described by a car producer.
.
PPUH AUTO-HAK S.J.
Produkcja Haków Holowniczych
Henryk i Zbigniew Nejman
76-200 SŁUPSK ul. Słoneczna 16K
tel/fax (059) 8-414-414; 8-414-413
E-mail: office@autohak.com.pl
www.autohak.com.pl
Technical data:
D-value: 8,0 kN
maximum trailer weight: 1500 kg
maximum vertical cup load: 75 kg
Foreword
Max vehicle weight [kg]
9,81
X
=
1000
Max vehicle weight [kg]
From manufacturer
D [kN]