Olympus CAMEDIA C-725 Ultra Zoom Manuel De Base page 34

1 C725UZBasic-E1
PLAYBACK (Cont.)
4
Press to start formatting.
● A bar is displayed to show the progress of formatting.
● To cancel formatting, select NO in step 3 and press
● All existing data stored on the card is erased when the card is formatted.
Make sure that you save or transfer important data to a PC before
formatting a used card.
Playback on a TV
1
Make sure that the TV and camera power are off .
En
2
Connect the camera to the TV using the video cable.
Connect to the TV's video
input (yellow) terminal
3
Set the mode dial to
TV. Set the TV to the video input mode.
● For details on switching to video input, refer to your TV's instruction
manual.
4
Select an image by using the arrow pad.
● The selected image will be displayed on the TV.
● Video signal is either NTSC or PAL compatible depending on the standard
in the intended area of distribution.
34
04.2.19 1:42 PM
Note
Mode dial
setting
Video cable
and press the POWER switch. Turn on the
Note
Page 34
.
Connect to the
VIDEO OUT jack.