Olympus CAMEDIA C-760 Ultra Zoom Manuel De Base page 15

basic_e_d4197_6.fm Page 15 Thursday, November 20, 2003 7:24 PM
SETTING THE DATE AND TIME X
1
Set the mode dial to P and press the power switch to turn
the camera on.
2
Press e.
• The top menu is displayed.
3
Press d on the arrow pad to select MODE MENU.
4
Press ac to select the SETUP tab, then press d.
5
Press ac to select X, then press d.
• The green frame moves to the selected item.
6
Press ac to select one of the following date formats:
Y-M-D (Year/Month/Day), M-D-Y (Month/Day/Year), D-M-Y
(Day/Month/Year). Then press d.
• Move to the year setting.
• The following steps show the procedure used when the date and time
settings are set to Y-M-D.
7
Press ac to set the year, then press d to move to the
month setting.
• To move back to the previous setting, press b.
• The first two digits of the year are fixed.
8
Repeat this procedure until the date and time are
completely set.
• The time is displayed in the 24-hour format. Consequently, 2 p.m. is
displayed as 14:00.
9
Press e.
• For a more accurate setting, press e when the time signal hits 00
seconds. The clock starts when you press the button.
10
To turn the camera off, press the power switch.
• The date and time settings will be returned to the factory default
settings if the camera is left without the battery for approximately
Note
one day.
En
En 15