Targus ACP50EU Mode D'emploi page 13

Targus Mobile Docking Station with Video
Connecting a USB Device
To connect a USB device, plug it into a USB port on the
docking station and follow the additional instructions
provided with the device.
All four USB ports meet USB hi-speed requirements by
providing 480Mbps through-put and 500mA of power.
However, the two black USB ports have two unique
features. See "Targus Always On" on page 15 for more
details.
The white USB ports are high-speed ports that provide
standard 500mA of power. The black USB power ports
are high-speed ports that provide up to 1Amp.
Connecting and Configuring an Audio
Device
1 Plug your headphones or speakers into the green
3.5mm Audio Out port on the docking station.
2 To connect a microphone, plug it into the mono Audio
In port.
3 To enable your headphones or speakers, you must
first choose USB Audio in the Properties Settings.
a For Windows
Panel, and then open the Sounds and Multimedia
folder. Select the Audio tab. Under Sound Play-
back, change Preferred Device to USB Audio from
the drop down list.
› Click Apply, then click OK.
b For Windows
choose Sound and Audio. Select the Audio tab.
Under Sound Playback, change Preferred Device
to USB Audio from the drop down list.
®
2000, click Start, Settings, Control
®
XP, go to the Control Panel and
13